Call Us +61 2 9521-4000 · info@aqua-seal.com.au

Home > Products > Problem Solvers > Poultice Plus

Poultice Plus

Stain Removing Paste

NON ACID
BIO 2017
Description

Poultice Plus™ is a non flammable, non toxic, and easy to use pre-mixed poultice paste to remove most stains. Safe on all natural stone, tile, concrete and grout to help remove stains from oil, coffee, tea, red wine etc. USE: Stone, grout, concrete, porcelain tile, encaustic tiles and other surfaces.

Key Features
  • Pre-mixed, ready to use
  • Safe, No fumes, No odour
  • Helps remove stains including oils, wine, coffee etc
  • Safe to use on natural stone, tile, grout and concrete
Available In

300 gm

Further Information
problem solver options

Stone and tile areas exhibit many specific problems such as efflorescence, grout residue and mineral staining. The Aqua-Seal STS™ range of Problem Solvers is designed to help solve these issues as safely and effectively as possible. There’s simply no other range of problem solvers for stone, tile, concrete & grout as comprehensive as Aqua-Seal STS™.

Grout Release Pro

Pre-Grout Release Agent

Strip-It

Sealer & Coating Remover

Poultice Powder

Stain Remover Powder

Poultice Plus

Stain Remover Paste
Sealer Options

The Aqua-Seal STS™ range of Sealers are formulated to provide either a Good, Better or Best type of performance based on the needs of the customer. The better the sealer then the better the protection, the longer the reaction time and the longer the life span of the sealer.

Spray’N’Seal

Premium Aerosol Sealer

Encaustic Seal Gold

Premium Encaustic Tile Sealer

Aqua-Seal Bronze

Natural Look Sealer (Good)

Aqua-Seal Silver

Natural Look Sealer (Better)
Important Information

LIMITATIONS:
▶ The degree of success will be determined by factors including but not limited to type of surface stained, length of time stain has been in place, & whether the surface stained is sealed or unsealed.

TEST FIRST:
▶ Due to the nature of different surfaces, you should do several test areas in inconspicuous areas according to the label instructions to determine surface colour stability and desired results. The end user must determine the suitability of the product for their intended use.