Call Us +61 2 9521-4000 · info@aqua-seal.com.au

Home > Problem Solving > Remove Porcelain Wax

Remove Porcelain Wax

Remove factory applied wax from porcelain tiles

PURPOSE

REMOVE REGULAR PORCELAIN WAX FROM PORCELAIN TILES

PRODUCT

MICROSCRUB

MicroScrub is a safe yet powerful biodegradable nano cream cleaner that is non-flammable, non-toxic and contains NO VOC’s (Volatile Organic Compounds) or acids. Utilising the latest Nano-AQS technology, MicroScrub will effectively remove most factory applied porcelain wax, floor finishes, light grout haze residue (including light epoxy grout haze), surface pencil marks, rust, mineral deposits and sealer residue. Can also be used to boost the performance of any cleaner or problem solver. Ideal to safely abrade away dirt & grime from heavily textured, hard to clean surfaces. Will not affect any penetrating type sealer. USE: On all natural stone, grout, ceramic, porcelain, terracotta, Saltillo, quarry tiles, terrazzo, concrete, pavers & masonry surfaces.

KEY FEATURES
  • Removes factory applied porcelain wax
  • Removes grout haze and floor finishes
  • Also removes sealer residue and surface rust
  • Removes ground in dirt from textured surfaces
  • Safe on all natural stone, porcelain and ceramics
powerful nano cream cleaner, microscrub, remove grout haze, dissolve dirt, remove sealer residue, remove porcelain wax
EQUIPMENT

AquaBug Cleaning Kit, Scrub pad or brush, broom, bucket, clean water and cotton towels. Optional: Scrub machine, wet-dry vac.

PRECAUTIONS
  1. Read entire label, SDS & technical bulletin before using;
  2. Wear appropriate skin & eye protection;
  3. Use when surface temperature is between 4°C & 32°C;
  4. Do not allow contact with any non-recommended surface;
  5. May slightly dull some polished calcium based surfaces e.g. marble, limestone, travertine.
PROCEDURE
  1. Sweep, vacuum, or wipe surface;
  2. Slightly pre-wet surface & grout joints with clean water;
  3. Pour approx 1-2 cups of MicroScrub to the pre wet surface;
  4. Scrub the surface with a white nylon pad, scrub brush or scrub machine;
  5. For vertical surfaces, pre-wet surface by spraying water from a spray bottle then apply MicroScrub directly to a white nylon pad then scrub;
  6. DO NOT ALLOW PRODUCT TO DRY ON THE SURFACE;
  7. Remove the dirty solution with a wet vac or mop;
  8. Rinse thoroughly with clean water;
  9. Repeat as necessary.
PURPOSE

REMOVE HEAVY PORCELAIN WAX FROM PORCELAIN TILES

PRODUCT

MICROSCRUB WITH XTREMECLEAN

powerful nano cream cleaner, microscrub, remove grout haze, dissolve dirt, remove sealer residue, remove porcelain wax
XTREMECLEAN, removes porcelain wax, removes wax coatings, heavy duty cleaner, heavy duty tile and grout cleaner, heavy duty stone, tile and grout cleaner, heavy duty cleaner and degreaser
EQUIPMENT

AquaBug Cleaning Kit, Scrub pad or brush, broom, bucket, clean water and cotton towels. Optional: Scrub machine, wet-dry vac.

PRECAUTIONS
  1. Read entire label, SDS & technical bulletin before using;
  2. Wear appropriate skin and eye protection;
  3. Use when surface temperature is between 4°C & 32°C;
  4. Do not allow contact with any non-recommended surface;
  5. Take care when using MicroScrub on dark coloured grout or stone;
  6. Do NOT use XtremeClean undiluted.
PROCEDURE

1. Sweep, vacuum, or wipe surface;
2. Dilute XtremeClean as follows depending on the severity of the problem:

  • a) LIGHT: Dilute 1 part XtremeClean to 15 parts clean water.
  • b) MODERATE: Dilute 1 part XtremeClean to 10 parts clean water;
  • c) HEAVY: Dilute 1 part XtremeClean to 5 parts clean water ;
  • d) STRIPPING: Dilute 1 part XtremeClean to 3 parts clean water;

3. Carefully apply the solution to surface with a sponge or a mop;
4. Allow minimum dwell time of 10 minutes. Longer dwell time may be required.
5. DO NOT ALLOW THE PRODUCT TO DRY ON THE SURFACE;
6. Scrub with a white nylon pad, scrub brush or scrub machine;
7. Remove the dirty solution with a wet vac or mop;
8. Rinse thoroughly with clean water;
9. Repeat the process as necessary.
NOTE: Add MicroScrub to standing solution just prior to scrubbing (after Step 4) to boost performance where required.

IMPORTANT NOTES

Note A: For extreme heavy coatings use Strip-It as per label instructions.

For additional options, please contact Aqua-Seal STS Technical Services via e-mail sales@aqua-seal.com.au or +61 2 9521 4000 with information specific to the problem you are addressing.

Important Note

These recommendations are intended as general guidelines for Problem Solving.
The actual product dilution ratios and cleaning requirements may vary depending on the use, amount and method of application.
Read entire Product Label, SDS and Technical Bulletin before using any product.
ALWAYS TEST A SMALL AREA to determine the ease of application, dilution, dwell time & desired results.
Keep surface clean and dry to reduce possibility of slip-fall accidents.