Home > Surface Finder > Terrazzo

TERRAZZO – CLEANING & SEALING

Different surfaces have different requirements in order to keep their beauty and integrity.
Aqua-Seal STS offers Pre-Grout Sealing, Sealing, Maintenance and Restoration specifications. These are listed below for your convenience.

Terrazzo is a composite material, poured in place or precast e.g. tiles or slabs. It consists of chips of marble, quartz, granite, glass, or other suitable material, poured with a cementitious binder or resin based binder or a combination of both. After it is cured, the Terrazzo is ground to a polished or honed finish (satin or matt look).

Select the finish & Click on the button below  for Pre-Grout Sealing, Sealing, Maintenance and Restoration specifications for brushed, honed, polished or sandblasted terrazzo.

TYPES OF FINISHES

BRUSHED – A brushed finish gives an aged appearance by simulating use & wear. The surface is brushed with mechanical wire brushes to make it smooth & slightly restore the colour.

HONED -A honed finish is smooth with little or no gloss (flat or satin finish).

POLISHED – A polished finish is smooth with a high gloss which also brings out the colour of the terrazzo.

SANDBLASTED A sandblasted finish is matte/textured finish which is achieved with pressurised water and sand mixture.

Select & Click on the button above for Pre-Grout Sealing, Sealing, Maintenance and Restoration specifications for brushed, honed, polished or sandblasted terrazzo.

Important Note

Read entire Product Label, SDS and Technical Bulletin before using any product.
ALWAYS TEST A SMALL AREA to determine the ease of application & desired results.

Do NOT follow this link or you will be banned from the site!